Table of Contents
Advertisement
4-2-6 Carrying Out Playback in
Feed Mode
When using a Betacam SX tape, you can use feed
mode to play back at any speed from 0.1 to 2 times
normal. You can select the playback speed in steps of
0.1 times normal speed. The playback output is output
from the (optional) SDTI OUTPUT connectors. This
therefore allows high-speed dubbing to another device
equipped with an SDTI input connector.
Note
Playback in feed mode requires a setting of extended
menu item 111.
Use the following procedure to carry out feed mode
playback.
6
0
2
1
Hold down the DMC MODE button, and turn the
search dial to set the playback speed.
While you hold down the DMC MODE button, the
playback speed setting for feed mode (initially the
maximum setting) appears in the speed display
area as a multiple of normal speed. (For example,
twice normal speed is shown as "2.00".)
2
Hold down the DMC MODE button, and press the
PLAY button.
Both buttons light, and playback in feed mode
starts.
3
Where you wish to stop playback, press the STOP
button.
Playback stops.
Speed display area
%
9
)
p
3 1
4-5
Chapter 4 Playback
Advertisement
Table of Contents
