Troubleshooting Idrac Direct (Usb Xml Configuration); Troubleshooting Idrac Direct (Laptop Connection) - Dell E31S Series Owner's Manual

Hide thumbs Also See for E31S Series:
Table of Contents

Advertisement

Related reference
Getting help
System board jumper settings
Troubleshooting iDRAC Direct (USB XML
configuration)
For information about USB storage device and server configuration, see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.
Steps
1. Ensure that your USB storage device is connected to the front USB Management Port, identified by
2. Ensure that your USB storage device is configured with an NTFS or an FAT32 file system with only one partition.
3. Verify that the USB storage device is configured correctly. For more information about configuring the USB storage device, see the
Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
4. In the iDRAC Settings Utility, ensure that USB Management Port Mode is configured as Automatic or iDRAC Direct Only.
5. Ensure that the iDRAC Managed: USB XML Configuration option is either Enabled or Enabled only when the server has
default credential settings.
6. Remove and reinsert the USB storage device.
7. If import operation does not work, try with a different USB storage device.
Next steps
If all troubleshooting fails, see the Getting help section.
Related reference
Getting help
Troubleshooting iDRAC Direct (Laptop
connection)
For information about USB laptop connection and server configuration, see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.
Steps
1. Ensure that your laptop is connected to the front USB Management Port, identified by
2. On the iDRAC Settings Utility screen, ensure that USB Management Port Mode is configured as Automatic or iDRAC Direct
Only.
3. If the laptop is running Windows operating system, ensure that the iDRAC Virtual USB NIC device driver is installed.
4. If the driver is installed, ensure that you are not connected to any network through WiFi or cabled ethernet, as iDRAC Direct uses a
non-routable address.
Next steps
If all troubleshooting fails, see the Getting help section.
Related reference
Getting help
152
Troubleshooting your system
icon.
icon with a USB Type A/A cable.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr4300e

Table of Contents