Steps
1. Slide the vFlash media unit in and align it with the v Flash media slot on the back of the chassis.
2. Connect the cable to the vFlash media unit.
3. Insert and tighten the screw securing the vFlash media unit to the chassis.
Figure 80. Installing the vFlash media unit
1. cable
3. vFlash media unit
5. standoff
Next steps
Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
After working inside your system
Related reference
Safety instructions
Control panel assembly
Removing the control panel
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the T15 Torx screwdriver ready.
138
Installing and removing system components
2. screw
4. vFlash media slot