Idrac Direct Led Indicator Codes - Dell E31S Series Owner's Manual

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
1. iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB
XML Import).
Table 7. iDRAC Direct LED indicators
Convention
A
B
C
D
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):
Table 8. iDRAC Direct LED indicator patterns
iDRAC Direct LED indicator pattern
Solid green for two seconds
Flashing green (on for two seconds and
off for two seconds)
Turns off
iDRAC Direct LED
indicator pattern
Green
Flashing green
Green and turns off
Not lit
Condition
Indicates that the laptop is connected.
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.
Condition
Turns green for a minimum of two seconds to indicate the start and end of a
file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
Dell DR4300e system overview 15