Installing The Vflash Media Unit - Dell E31S Series Owner's Manual

Steps
1. Remove the screw securing the vFlash media unit to the chassis.
2. Remove the cable from the vFlash media unit and the backplane.
3. Slide the vFlash media unit toward the front of chassis and lift it out of the system.
Figure 79. Removing the vFlash media unit
1. cable
3. vFlash media unit
5. standoff
Next steps
Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
After working inside your system
Related reference
Safety instructions

Installing the vFlash media unit

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #1 screwdriver ready.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
2. screw
4. vFlash media slot
Installing and removing system components 137