Table of Contents
Advertisement
Attach the pyrolyzer or NDIR
1. Remove the main module as described in the Mount the Device
process.
2. Plug the connector into the socket (as indicated in the image) at
the bottom right of the terminal module through the rectangular
access of the mounting bracket. Align the fitting at the top rear
of the pyrolyzer or NDIR with the gas inlet port at the bottom of
the mounting bracket.
3. Connect the pyrolyzer or NDIR to the detector with the three
provided mounting screws
4. Place the main module and screw the two screws referring to
steps 11 and 12 of 'Mounting the device.'
15
Advertisement
Table of Contents
