Uninstalling Network Print Port On Windows 95/98/Me/Nt/2000/Xp/2003; Tcp/Ip Lpr Port Printing Installation; Basic Tcp/Ip Installation Overview - TP-Link TL-PS110P User Manual

It starts again to search for the print server on the network by using the protocol you
specify in the step above. When finished, the print server will be displayed along with the
its Node ID, as shown in
the back of the print server unit). Select one of the print server's ports from the list.

Uninstalling Network Print Port on Windows 95/98/Me/NT/2000/XP/2003

To provide users an easiest way to remove all of the Network Print Port components from
Windows 95/98/Me, the Network Print Port software comes with un-installation wizard
program to help users remove the software components from their Wind
9 5/98/Me/NT/2000/XP/2003 systems in minutes. Please follow the directions listed below to
proceed with the un-installation procedure.
After the Network Print Port is removed, the print server is no longer accessible via the
Network Print Port. You have to re-install the Network Print Port on your system in order t
access the print server again.
Procedure:
1. Click Start, point to Settings, and select Control Panel.
2. Double click the Add/Remove Programs icon.
3. Click Add/Remove tab.
4. Select Network Print Monitor for Windows 95/98/Me and click Add/Remove button.
5. The un-installation wizard p
6 . Follow the directions on the screen to complete the un-installation procedure.
Note: We rec ommend you restart your computer after un-installation is finished.

7. TCP/IP LPR Port Printing Installation

Basic TCP/IP Installation Overview

W hen installing your print server in a TCP/IP environment, IP addresses are essential as a
b asic means of communications. It is therefore necessary to first assign an IP address to
the following picture. (The last 6 digits of the Node ID, located on
rogram will be launched.
52
ows
o