Honda VFR1200X/XD Manual page 82

7. Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling center.
Engine Oil
8. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9. Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
10. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Rubber
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
seal
Oil filter
Changing Engine Oil & Filter
u
continued 81