Honda VFR1200X/XD Manual page 114

Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel
between the fork legs and insert the
lightly greased front axle shaft to the
end, through the left fork leg and wheel
hub.
3. Align the end of the front axle shaft with
the surface of the fork leg.
Surface of fork leg
End of front axle
shaft
Tire Puncture
4. Tighten the left axle pinch bolts to hold
the axle.
5. Tighten the axle bolt.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m).
6. Loosen the left axle pinch bolts.
7. Tighten the right axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
8. Install the right brake caliper and tighten
the mounting bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m).
Removing Wheels
u
continued 113