Removing & Installing Body Components; Battery - Honda VFR1200X/XD Manual

Removing & Installing Body Components

Battery

Battery
Negative
terminal
74
Rubber strap
Positive
terminal
❙
Removal
Make sure the ignition switch is off.
1. Remove the seat.
2. Unhook the rubber strap.
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock is set to the proper time
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead"
P. 78
2
terminal from
-
terminal from
+
+
P. 24
2
P. 62
2
P. 117
2