Maintenance & Care - Bissell 54K25 User Manual

Maintenance & Care
When you're done
1. Turn power switch OFF.
2. Unplug power cord from outlet.
3. Remove and empty collection tank.
a. Release collection tank latches [1 each side]
by pulling up from bottom of latch and then
out.
b. Carefully remove collection tank from lower
body by lifting handle.
c. Carry collection tank to a toilet or sink. To
empty, pour out contents using opening at
back of tank.
d. Rinse collection tank thoroughly.
e. Remove vent cover from top of collection
tank by pulling the tab on top and pulling up.
Remove foam filter from vent cover. Rinse
filter thoroughly and replace back into vent
cover. Replace vent cover back into collection
tank, making sure the tab clicks back into the
locked position.
4. Remove lint and hair from red gasket in base
of unit. (Do not remove gasket)
5. Clean nozzle window by lifting latch and
removing from machine. Rinse under running
water. When finished replace nozzle and secure
with latch.
6. Replace collection tank on lower body and
secure with latches.
7. Wrap power cord around Quick Release Cord
Wrap™ on side of deep cleaner.
8. Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
NOTE: You may have cleaning solution remain-
ing in the clean water/solution tank. You may
store your deep cleaner this way for the next
cleaning task, but never keep soiled solution in
the collection tank.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
CAUTION
Do not store unit where freezing may occur. Damage to
internal components may result.
a.
c.
4.
b.
e.
6.
www.BISSELL.com
9