Table of Contents
Advertisement
Adjusting Center Gage Wheels
The gage wheels must be adjusted in the proper hole
location for each height-of-cut position.
1.
After adjusting height-of-cut remove bolt and
nut (Fig. 11).
2.
Select a hole position so the gage wheel is 3/8"
(9.5 mm) off the ground for the height-of-cut to
be used (Fig. 11).
3.
Reinstall the bolt and nut (Fig. 11).
3
1
Figure 11
1. Center Gage Wheels
2. Nut
2
m–4124
3. Bolt
Operation
9
Advertisement
Table of Contents
