Table of Contents
Advertisement
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
– While playing back a BD-Video
– While executing functions using a network,
such as Network Service
• When "Automatic" is set for "Audio Description"
(
14), some parts of Home Network function
cannot be used.
Set "Audio Description" to "Off".
When using this unit's DVB-via-IP Server
function, the broadcast being watched on the
DVB-via-IP Client device or being recorded
with it is interrupted.
• If you use a network function other than the
DVB-via-IP Server function when "Network
Function Priority" for this unit is set to "Network
Service / Home Network", the broadcast you are
watching on the DVB-via-IP Client device or
recording with it will be interrupted. Change the
"Network Function Priority" setting for this unit to
"DVB-via-IP Server". (
USB
This unit does not recognise the USB device
correctly.
• If inserted during playback the USB device may
not be recognised by this unit.
Disconnect and reconnect the USB device. If it
still does not recognise the connection, switch
the unit to standby and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognised by this unit.
• Two USB devices cannot be used
simultaneously. If you insert a USB device while
watching TV, the USB device detection screen
is displayed. Use this screen to select the
device you want to use.
Cannot play back videos on the USB device
smoothly.
• Use the port on the front side of this unit, which
supports USB 3.0. You may be able to improve
the performance.
59)
Photo
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(
74)
Reset
To return all the settings to the factory preset
Perform "Shipping Condition" or "Default
Settings". (
60)
Messages on the front panel display
The following messages or service numbers appear on the
front panel display when something unusual is detected.
BD
("∏" stands for a number.)
The remote control and main unit are using different codes.
Change the code on the remote control. (
CAM-UP
CAM is being updated.
CONV
The picture quality of the selected programme stored in the
USB HDD is being changed.
Do not disconnect the USB HDD from this unit.
GUIDE
TV Guide data is being downloaded.
NoERAS
You cannot delete items on this disc. The disc may be
damaged.
NoREAD
The disc is dirty. (
5) The unit cannot record, play, or edit.
• The lens cleaner has finished cleaning.
Press [< OPEN/CLOSE] on the main unit to eject the disc.
PLEASE WAIT
• Displayed when the unit is started and is switched to
standby.
• There was a power failure or the AC plug was disconnected
while the unit was on. The unit is carrying out its recovery
process. Wait until the message disappears.
61)
65
TQBS0166
Advertisement
Table of Contents
