Table of Contents
Advertisement
Switch "Set 1", "Set 2" or "Standard" by using
[2, 1].
• You can register desired settings to "Set 1" and
"Set 2". Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for "Set 1"/ "Set 2" are the
same as the settings for "Standard".)
• You cannot change the "Standard" settings.
Picture Type
Select the picture quality mode during play.
Sharpness Adjustment
Noise Reduction
Luminance/Colour Adjustment
Adjust the contrast, brightness, tone curve
(white/black), colour saturation and hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
Dynamic Range Adjustment
(HDR Setting)
When this unit is connected to a TV with HDR,
adjusts the brightness of the entire screen
when HDR (High Dynamic Range) video is
output.
Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does
not support HDR input, HDR video is output
converting to a SDR (Standard Dynamic
Range) video signal. If you set a smaller value,
their contrast will be reproduced more
faithfully, but the entire screen will appear
darker. To increase the brightness, set a larger
value.
24p / 25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
– "Video Format" is set to "Automatic", "4K",
"1080i"
or "1080p"
§
Only for 24p Conversion
§
– Connect 24p/25p compatible TV
• Noise may appear on the image when you
switch the setting.
(
57)
§
Progressive
Select the method of conversion for
progressive output to suit the type of content
being played.
• Auto
• Video
Select this setting when the content is
distorted if "Auto" is selected.
• Film
Select this if the edges of the film content
appear jagged or rough when "Auto" is
selected. However, if the video content is
distorted, then select "Auto".
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Sound Settings
Sound Effects
• This function is effective when "Digital Audio
Output" is set to "PCM". (
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Remaster 1/Remaster 2
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
DSD LPF Setting
Select the settings that suit your sound quality
preferences.
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
3D Settings (
31)
Signal Format
Graphic Display Level
• The menu is not displayed when playing photos.
56)
33
TQBS0166
Advertisement
Table of Contents
