Using The Dicing Disk - Black & Decker PERFORMANCE P6010 Manual

The controls are located on the front of the base. See the speed chart below for food
processing and speed recommendations. Various speeds are used for chopping,
mixing, dicing, slicing and shredding. When these functions are selected the
processor will run continuously until the PULSE|OFF button
is pressed to stop. (E)
1. Plug in the appliance to turn it on.
2. Select low, medium or high speed depending on
what task you are completing. Press and release
PULSE button to pulse.
3. To stop, press PULSE|OFF.
4. Always unplug the appliance when not in use.
PULSE
Use for precise
control when
chop/mix
Fresh herbs
Nuts
Bread crumbs
Meat
U SIN G TH E D IC I N G DI SK
Important: The dicing disk can only be used with the
large workbowl. Only run the processor on LOW speed
when using the dicing disk. DO NOT use dicing disk with
small workbowl.
1. Lock workbowl onto base.
2. Place the dicing shaft into the bottom of the dicing
disk and turn clockwise to lock it into place. (F)
3. Carefully pick up the dicing assembly using the finger holes in the top of
the disk and place in the workbowl over the center post. (G)
LOW - SPEED 1
Dicing and
Mixing Dough
Vegetables
including
• potatoes
• onions
• cucumbers
E
E
Fruit
Bread dough
Pie crust
MED - SPEED 2
Slicing and
Shredding
Vegetables
including
• potatoes
• onions
• cucumbers
• cabbage
• carrots
E
Fruit
Cheese
(freeze 30 min.
prior)
Chocolate
(O RANG E)
8
E
HIGH - SPEED 3
Chopping
and Mixing
(continuous processing)
Vegetables including
• potatoes
• onions
• cucumbers
Fruit
Bread crumbs
Meat
Sauces, Batters, Dips
F