Table of Contents
Advertisement
4.7 ADVANCE MENU ___DETECTION
4.7 ADVANCE MENU ___DETECTION
Move the cursor to "DETECTION", and press "ENTER", then the screen will show the
following options.
1)
DETECTION SETUP:
TITLE
DET
01
ON
02
ON
03
ON
04
ON
a)
TITLE:
Show camera title of each channel.
b)
DET:
Select "ON" to activate the motion detection function of the selected channel.
Select "OFF" to inactivate the motion detect function of the selected channel.
c)
AREA:
Press the "ENTER" button to set detection area.
Pink blocks represent the area that is not being detected while the transparent blocks
are the areas under detection.
Press "ENTER" to confirm the
start area
Multi-detection area
DETECTION
DETECTION
DETECTION SETUP
DETECTION TIMER
DETECTION
DETECTION
AREA
LS
SETUP
07
SETUP
07
SETUP
07
SETUP
07
Press ◄ or ► to choose the
width of the area
Press "－" to turn all area
under detection
15
SS
TS
03
02
03
02
03
02
03
02
Press ◄ or ► to choose the
height of the area, and press
"ENTER" again to confirm.
Press "＋" to close all
detection area
RE
ALARM
10
OFF
10
LOW
10
HIGH
10
OFF
Advertisement
Table of Contents
