Advertisement
Toshiba VCRs
1. INPUT SELECT, LINE SELECT, or TV/LINE button usually on remote (sometimes in panel up front)
If you are only getting sound, look for a SIMUL button or switch and turn it OFF.
2. Aux or Line channel below 2
3. Press SOURCE button on the remote
Toshiba TV/VCR Combos
• Input Select is in a drop panel on the unit, push button labeled ADV.
Westinghouse
--------------------------------------------------------------------------------
Westinghouse TVs
• TV/VIDEO on remote or MENU, SET-UP , INPUT, VIDEO
Westinghouse VCRs
• Aux or Line channel below 2.
Westinghouse TV/VCR Combos
• TV/LINE button on the unit or remote.
XR1000
--------------------------------------------------------------------------------
XR1000 TVs
• Aux channel below 2.
XR1000 VCRs
1. Aux channel below 2.
2. TUNER/EXT button inside panel or on remote.
Zenith
--------------------------------------------------------------------------------
Zenith TVs
1. Press MENU until you reach the SOURCE MENU. Select SOURCE, use Adjust keys to switch from
ANTENNA to AUX or AV/VCR
2. Aux channel below 2 or 1
3. AUX button behind hidden panel or on remote. In addition, it may be necessary to press AUX AUDIO
SOURCE TO TV to get the full sound.
4. SOURCE or SOURCE INDEX button on TV or remote. This may bring up ANT/AV/VCR. If so, use
the Adjust keys to select AV/VCR.
5. SOURCE or VIDEO SOURCE switch inside a front panel. Switch to the appropriate Aux input.
Zenith VCRs
1. Press MENU, select TUNING FEATURES or SETUP , go to SOURCE, switch to AUX.
2. SOURCE SELECT or AUX button on remote
17
Advertisement
