Advertisement
Shintom
--------------------------------------------------------------------------------
Shintom VCRs
1. Aux channel below 2. Using the remote for this will not always work.
2. Possibly channel 28.
Signature 2000
--------------------------------------------------------------------------------
Signature 2000 TVs
1. TV/AUX button on TV or remote
2. Aux channel below 2
Signature 2000 VCRs
1. Aux channel below 2 (may have to auto-program with the system on)
2. Press MENU button until you reach LINE IN , then choose AUX
3. INPUT on remote
Sony
--------------------------------------------------------------------------------
Sony TVs
1. TV/VIDEO button on TV or remote (if you only get sound, check the back of the TV for an EXT
AUDIO/VIDEO switch, and if one is present, switch it to VIDEO).
2. Press MENU, change Source from TV to AV.
3. FUNCTION button on TV or an Aux channel below 2
Sony VCRs
1. INPUT SELECT button or switch on the front panel or remote. Problems with these VCRs may
indicate the CABLE BOX CONTROL needs to be ON.
2. Line channel below 2
3. Press MENU, select Source ID, then switch to LINE or INPUT
Sony TV/VCR Combos
• INPUT button on remote
Sylvania
--------------------------------------------------------------------------------
Sylvania TVs
1. Press MENU, select INPUT, choose CHANNEL or PICTURE SOURCE, then choose AUX
2. Press DISPLAY or STATUS until you reach ANT, then use volume + or - to select AUX IN.
3. Press either TV/AV, AUX, or VIDEO button up front or on remote
Sylvania VCRs
1. Ext or Aux channel below 2
2. Press MENU on remote, go to VCR SETUP , select INPUT, choose appropriate Input.
15
Advertisement
