Samsung LNT4669F Training Manual page 55

Ⅱ. Inside of Peony2
Capture Port
The capture block consists of two separate components, the Main
Picture block and the PIP block. The Main Picture block accepts an
analog signal through the Analog Front End (AFE), and is
processed through a TV decoder.
The TV decoder is equipped with a motion detector that can
identify the area of picture containing motion such that a good
mix between the temporal and spatial (2D-filter) can be
determined.
The filtered signal is then piped through a scaler to produce the
preferred format as determined by the selected display mode.
SVP™LX digital capture ports support 1080i, 480i, 480p, and 720p,
up to SXGA (1280x1024x60) resolution.
The PIP block accepts a digital signal, and provides a preferred
format like the Main Picture block. It is not equipped with 3D Digital
Comb Filter/TV-decoder, and has a simpler noise reduction circuitry.
SCALER: SVP-LX64