Warning And Caution Symbols; Safety Precautions - Omron Techman Robot Series User Manual

Warning and Caution Symbols

The Table below shows the definitions of the warning and caution levels used in our manuals. Pay
close attention to them when reading each paragraph, and observe them to avoid personal injuries or
equipment damage.

Safety Precautions

DANGER:
This product can cause serious injury or death, or damage to itself and other equipment, if the
following safety precautions are not observed:
All personnel who install, operate, teach, program, or maintain the system must read the Hardware

installation Manual, Software Manual, and Safety Manual according to the software and hardware
version of this product, and complete a training course for their responsibilities in regard to the
robot.
All personnel who design the robot system must read the Hardware installation Manual, Software

Manual, and Safety Manual according to the software and hardware version of this product, and
must comply with all local and national safety regulations for the location in which the robot is
installed.
The TM AI Cobot must be used for its intended use.

Results of the risk assessment may require the use of additional risk reduction measures.

Power to the robot and its power supply must be locked out and tagged out or have means to

control hazardous energy or implement energy isolation before any maintenance is performed.
Omron TM Collaborative Robot: Conveyor Tracking User's Manual
DANGER:
Identifies an imminently hazardous situation which, if not avoided, is likely to result in
serious injury, and might result in death or severe property damage.
WARNING:
Identifies a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, and might result in serious injury, death, or significant property damage.
CAUTION:
Identifies a potentially hazardous situation which, if not avoided, might result in minor
injury, moderate injury, or property damage.
Read Manual Label; Impact Warning
10