Siemens SIMATIC ET 200S Manual page 6

Properties
1.1 Digital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0)
Requirements for operation
It is possible to operate the 4DO DC24V 2A HF digital electronic module with the following
interface modules, as of the specified order numbers:
Interface module
IM 151-1 STANDARD
IM 151-1 FO STANDARD
IM 151-1 HIGH FEATURE
IM 151-3 PN
IM 151-3 PN FO
IM 151-3 PN HIGH FEATURE
IM 151-1 BASIC
IM151-1 COMPACT
IM 151-7 CPU
IM 151-7 CPU FO
IM 151-7 F-CPU
IM 151-8 PN/DP CPU
IM 151-8 PN/DP F-CPU
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal Assignment Terminal
1 DO
0
2 DO
2
3 M
4 M
A4 AUX1
A3 AUX1
6
Terminal assignment for 4DO DC24V/2A HF (6ES7132-4BD30-0AB0)
Assignment
5 DO
1
6 DO
3
7 M
8 M
A8 AUX1
A7 AUX1
as of order number
6ES7151-1AA05-0AB0
6ES7151-1AB05-0AB0
6ES7151-1BA02-0AB0
6ES7151-3AA23-0AB0
6ES7151-3BB23-0AB0
6ES7151-3BA23-0AB0
6ES7151-1CA00-0AB0
6ES7151-1CA00-1BL0
6ES7151-1CA00-3BL0
6ES7151-7AA20-0AB0
6ES7151-7AB00-0AB0
6ES7151-7FA20-0AB0
6ES7151-8AB00-0AB0
6ES7151-8FB00-0AB0
DO : Output signal, Channel n
•
n
M: Ground
•
AUX1: Protective-conductor terminal or potential bus (freely usable
•
up to 230 VAC)
Digital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0)
Firmware version
(or higher)
V2.2.4
---
V2.2.3
V6.1
V6.1
V6.1
---
---
---
---
Notes
Manual, 10/2009, A5E02515335-02