Error Types - Siemens SIMATIC ET 200S Manual

Diagnostics

3.2 Error types

3.2 Error types
Digital electronic module error types
Table 3- 1
26
D
1
Channel-based diagnostics
The following shows the assignment of bytes 36 and 37 in channel-based diagnostics of the
electronic module:
Byte
36
37
Additional information on channel-based diagnostics is available in the ET 200S Interface
Module device manuals.
14
Error types
Error type
11010: External error
Diagnostic message will be output on channel 0. "Short circuit" is only detected in the switched
output state.
Assignment
Channel type: 00
Number of channel providing the diagnostics: 00000
Channel resolution: 001
Type of error: See above
Meaning
Short circuit (at least on one
channel)
1
B
(bit)
B
Digital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0)
Remedy
Correct the process wiring
B
Manual, 10/2009, A5E02515335-02