Vga Enable/Disable - Supermicro X7DBT-INF User Manual

VGA Enable/Disable

JPG1 allows you to enable or disable the
VGA port. The default position is on pins
1 and 2 to enable VGA. See the table
on the right for jumper settings.
2
I C Bus to the PCI-E Slot
2 2
JI C1/JI C2 allows you to enable the
2
I C Bus to communicate with the PCI-
Express slot. For the jumpers to work
properly, please set both jumpers to the
same setting. If enabled, both jumpers
must be enabled. If disabled, both
jumpers must be disabled. See the table
on the right for jumper settings.
LAN1
SIMS0
LAN2
S I/O
A
B
PCI-E x8
VGA Enable/Disable
Both Jumpers
Pins 1-2
Pins 2-3
Jumper Setting
Closed
Open
FP CTRL
CPU1
CPU2
BIOS
2-23
Chapter 2: Installation
Jumper Settings
Defi nition
Enabled
Disabled
I 2 C to PCI-Exp Slot
Jumper Settings
Defi nition
Enabled
Disabled (*Default)
A. VGA Enabled
B. I 2 C Bus to PCI slots