Reset Button; Power Button - Supermicro X7DAL-E User Manual

Reset Button

The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to the
hardware reset switch on the computer
case. Refer to the table on the right for
pin defi nitions.

Power Button

The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily con-
tacting both pins will power on/off the sys-
tem. This button can also be confi gured
to function as a suspend button (with a
setting in the BIOS - see Chapter 4). To
turn off the power when set to suspend
mode, press the button for at least 4
seconds. Refer to the table on the right
for pin defi nitions.
PWR
JPWF
Force-On
Alarm
Reset
LAN1/LAN2
Line-in/
Line-out
Fan5
Fan6
A. Reset Button
B. PWR Button
2nd
Branch
1st
Branch
Power LED
HDD LED
NIC1 LED
NIC2 LED
Fan2
Fan3
OH/Fan Fail LED
PWR Fail LED
2-13
Chapter 2: Installation
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Signal
2 +3V Standby
20 19
Ground
NMI
X
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Reset Button
Ground
Power Button
Ground PWR
2 1
A
B