Hdd Led; Nic1/Nic2 Led Indicators - Supermicro X7DAL-E User Manual

HDD LED

The HDD LED connection is located
on pins 13 and 14 of JF1. Attach the
hard drive LED cable here to display
disk activity (for any hard drives on
the system, including SAS, Serial ATA
and IDE). See the table on the right
for pin defi nitions.

NIC1/NIC2 LED Indicators

The NIC (Network Interface Control-
ler) LED connection for GLAN port1 is
located on pins 11 and 12 of JF1 and
the LED connection for GLAN Port2
is on Pins 9 and 10. Attach the NIC
LED cables to display network activity.
Refer to the table on the right for pin
defi nitions.
PWR
JPWF
Force-On
Alarm
Reset
LAN1/LAN2
Line-in/
Line-out
Fan5
Fan6
2nd
Branch
1st
Branch
Power LED
A
B
Fan2
C
Fan3
OH/Fan Fail LED
PWR Fail LED
2-11
Chapter 2: Installation
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +5V
14 HD Active
GLAN1/2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9/11 Vcc
10/12 Ground
A. HDD LED
B. NIC1 LED
C. NIC2 LED
20 19
Ground
NMI
X
X
Vcc
Vcc
HDD LED
Vcc
NIC1 LED
NIC2 LED Vcc
Vcc
Vcc
Reset
Ground
Ground PWR
2 1
Reset Button
Power Button