Supermicro X7DA8 Plus User Manual page 78

X7DA8+/X7DAE+ User's Manual
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to set the BAUD rate for Console Redirection. The options
are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to choose the console redirection type. The options are VT100,
and VT-UTF8.
VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+,
Flow Control
This item allows you to set the fl ow control for the console redirection. The options
are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how the console redirection is to be connected:
either Direct or Via Modem.
Continue CR after POST
This item allows you to decide whether you want to continue with console
redirection after POST routines. The options are On and Off.
.
4-18