Supermicro X7DA8 Plus User Manual page 67

Chapter 4: BIOS
Boot Features
Access the submenu to make changes to the following settings.
QuickBoot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine by
skipping certain tests after the computer is turned on. The settings are Enabled
and Disabled. If Disabled, the POST routine will run at normal speed.
Quiet Boot
This setting allows you to Enable or Disable the graphic logo screen during
boot-up.
POST Errors
Select Enabled to temporarily halt system boot and display POST (Power-On-
Self Testing) error messages when errors occur during bootup. Select Disable
to continue with system boot even when an error occurs. The options are
Enabled and Disabled.
ACPI Mode
Select Yes to use ACPI (Advanced Confi guration and Power Interface) power
management on your system. The options are Yes and No.
ACPI Sleep Mode
This option allows you to decide how you are going to use the ACPI (Advanced
Confi guration and Power Interface) power management on your system when
it is in the sleep mode. The options are S1, S1&S3, and S3.
Power Button Behavior
If set to Instant-Off, the system will power off immediately as soon as the user
hits the power button. If set to 4-sec., the system will power off when the user
presses the power button for 4 seconds or longer. The options are instant-off
and 4-sec override.
Resume On Modem Ring
Select On to wake your system up when an incoming call is received by your
modem. The options are On and Off.
Keyboard On Now Function
This feature allows you to determine how a user can power on the system
by using the keyboard when it is in S3 or S5 state. Select Disable to disable
this feature. Select Space to allow the user to power on the system when the
user presses the <Space> bar. Select Password to allow the user to power on
the system by entering a pre-set password. (*The preset password must be
5-character long.)
4-7