CYBEX 11080-999-4 B Owner's Manual page 16

Install weight plate decals
You have the option to use pounds, kilograms or both.
1. Slowly and carefully peel off back side of decal, making sure that the decals remain attached
to the front sticker.
2. Align holes in decal with appropriate holes in weight stack. Do not allow the adhesive to
touch weight stack at this time.
3. Insert a guide pin through each hole of the template. A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.
4. Align decal and rub it onto weight plates.
5. Remove front side, leaving decals adhering to weight plates.
IMPORTANT:
It is important that you perform regular inspection and maintenance activities on your equipment.
See the CYBEX Eagle Owner's Manual for inspection and maintenance activities. If you do not have
a CYBEX Eagle Owner's Manual or if you have any questions or concerns, call CYBEX Customer
Relations at 888-462-9239.
Cybex Owner's Manual
Front
Back
Guide Rod
Weight Stack
9 .0
2 0
1 8 .0
4 0
6 0
3 6 .0
8 0
4 5 .0
1 0 0
5 4 .0
1 2 0
6 3 .0
1 4 0
7 2 .0
1 6 0
8 1 .0
1 8 0
9 0 .0
2 0 0
9 9 .0
2 2 0
1 0 8 .0
2 4 0
1 1 7 .0
2 6 0
1 2 6 .0
2 8 0
1 3 5 .0
3 0 0
1 4 4 .0
3 2 0
1 5 3 .0
3 4 0
1 6 2 .0
3 6 0
Kilograms
1 7 1 .0
3 8 0
1 8 0 .0
4 0 0
Pounds
16