CYBEX 11080-999-4 B Owner's Manual page 10

6. Remove pulley then remove other end of belt from cam.
7. Remove one of the two BHSCS (Button Head Socket Cap Screws) securing the pivot shaft.
8. Carefully remove pivot shaft and pulley shaft.
CAUTION: Be extremely careful when removing shaft so you do not ruin the threads on
the shaft.
9. Remove the six BHSCS securing the two halves of the frame.
10. Carefully move each half through the doorway to the desired location.
Cybex Owner's Manual
BHSCS
Washer
Pulley/Cable
Pivot Shaft
BHSCS
Washer
Pulley/Cable
Pivot Shaft
BHSCS
Washer
Pulley/Cable
Pivot Shaft
BHSCS (qty 3)
10
Pulley Shaft
Pulley Shaft
Pulley Shaft
BHSCS (qty 3)
Nylon Locknut (6)