Studio One - PRESONUS FaderPort 16 Owner's Manual

2

Studio One

2.1 Getting Started
2 Studio One
2.1 Getting Started
Select
Select Control Mode
Studio
Studio MCU
One One (Logic) (Cubase)
Control Mode
EXIT
MCU MCU MCU HUI SETUP EXIT
Restart
(Logic) (Cubase) (Sonar) Restart
FaderPort
FaderPort
By default, your FaderPort is configured for Studio
One. No further device setup is required.
If you have changed the FaderPort's Operating Mode and would like to return to
using it with Studio One, press the first two Select buttons while powering on your
unit.
Press the Select button below Studio One.
Note: In addition to Studio One, this operation mode should be used with other DAWs
MCU
that provide native FaderPort support. A complete list of native-support DAW
applications is available at www.presonus.com.
Once you have selected your mode, press the Select button below the "Exit" screen
to reboot your FaderPort. This mode will be selected automatically every time you
boot your FaderPort.
Power User Tip: From the boot menu, you can also adjust the fader sensitivity and speed
to fine tune your FaderPort to work the way you want it. Please see Section 8 for more
information on the customized setup modes.
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
To configure your FaderPort in Studio One:
1. From the Start page, click on the Configure External Devices link.
2. Click the Add button.
FaderPort™ Multichannel Production Controllers
Owner's Manual
5