1
Overview
1.6
Firmware Updates
During installation, you will be given the option to install various PreSonus
audio drivers. No driver installation is required to use the FaderPort.
Once installed, connect your FaderPort to your computer.
Universal Control will alert you if there is new firmware available for
your FaderPort. Clicking on the Update Firmware button will begin the
update process. This process can take up to five minutes. At the end of
the firmware update, you will be prompted to reboot your FaderPort.
Once rebooted, your FaderPort faders may require recalibration. This is an automated
process. Do not interfere with or interrupt the fader calibration process.
Note: One of the Operating Modes must be selected to perform a firmware update.
FaderPort™ Multichannel Production Controllers
Owner's Manual
4