Studio One - PRESONUS FaderPort Owner's Manual

2

Studio One

2.1 Getting Started
Studio One
2
Getting Started
2.1
Studio One
By default, your FaderPort is configured for Studio One. No further device setup
is required.
If you have changed the FaderPort's Operation Mode and would like to return
to using it with Studio One, press and hold the NEXT button while powering
on your FaderPort, then press the Solo button to enable Studio One.
Note: In addition to Studio One, this operation mode should be used with
other DAWs that provide native FaderPort support. A complete list of native-
support DAW applications is available at www.presonus.com.
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
To configure your FaderPort in Studio One:
1. From the Start page, click on the Configure External Devices link.
2. Click the Add button.
3. From the manufacturers list at the left, click on
PreSonus and then select FaderPort (2018).
Note: The original FaderPort uses a different mapping than its successor. You must select
FaderPort (2018) for proper functionality.
FaderPort™ Multichannel Production Controllers
Owner's Manual
5