Table of Contents
Advertisement
Help Guide
When the desired access point is not displayed on the screen: Select [Manual
Setting] and set the access point.
*
For the input method, refer to "How to use the keyboard."
If you select [Manual Setting], input the SSID name of the access point, then select
the security system.
3. Input the password, and select [OK].
Access points without the
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
1. Input box
The characters you entered are displayed.
2. Switch character types
Each time you press
switch between alphabet letters, numerals and symbols.
3. Keyboard
Each time you press
displayed one-by-one in order.
For example: If you want to enter "abd"
Select the key for "abc" and press
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
mark do not require a password.
in the center of the control wheel, the character type will
in the center, the characters corresponding to that key will be
once to display "a" → select "
"((5) Move
Advertisement
Table of Contents
