Table of Contents
Advertisement
Chapter 5: Advanced Serverboard Setup
3. Locate four of the M3 screws in the VRM-008 package and use them to secure
the power pod onto the serverboard as shown in the picture below. (Recom-
mended torque: not to exceed 2.5 in-lbf.)
Securing the power pod with four M3 screws.
4. Repeat steps 1 and 2 to install a second Itanium2 CPU (w/ power pod) as
needed.
Figure 5-2. Dual Itanium2 CPUs with Power Pods Installed
5-7
Advertisement
Table of Contents
