Table of Contents
Advertisement
Before placing food in the drawer
Clean the inside of the appliance with warm water and a little liquid detergent to
●
remove manufacturing and transportation dust.
Ideally, allow the drawer to run empty overnight, or for at least 5 hours, to allow it to
●
cool to the appropriate temperature before placing food inside.
The appliance may have an odor initially, but this will go when the compartment has
●
cooled sufficiently.
Energy efficiency
For the most energy efficient use of your appliance:
Ensure your CoolDrawer™ has adequate ventilation as recommended in the
●
installation instructions.
Allow good clearances in front of air ducts within the CoolDrawer™.
●
Cool hot foods down before placing them in the CoolDrawer™.
●
Do not overfill the CoolDrawer™.
●
Keep door openings to a minimum.
●
Select a temperature setting that isn't too cold.
●
If your appliance is turned off for any reason, wait 10 minutes before turning it back on. This
will allow the refrigeration system pressures to equalize before restarting.
The temperature of the drawer is accurately controlled and does not change with the
temperature or humidity of the surroundings; whether summer or winter.
For best storage of general household food items, we recommend to use the appliance
at its factory default temperature and configuration settings. Adjusting temperature and
moving the shelves and bins will have minimal impact on efficiency.
To use the control panel
The food mode icon selected will flash until the CoolDrawer™ reaches a suitable
temperature for food to be added (this will take approximately 1 – 6 hours).
14
USING YOUR APPLIANCE
Unlock the control panel, press
3 seconds. The
illuminated.
Match the type of items you wish to
store in the CoolDrawer™ to the relevant
storage environment.
Press
FOOD MODE
A light illuminates to indicate the matching
FOOD MODE
icon will no longer be
to scroll through the available
.
as you scroll the list.
for
Advertisement
Table of Contents
