SAFETY AND WARNINGS READ AND SAVE THIS GUIDE WARNING! Electric Shock Hazard WARNING! To avoid hazard, follow these instructions carefully before Installing or using this appliance. Failure to follow this advice may result in Please make this information available to the persons installing the appliance. electrical shock or death.
INTEGRATED COOLDRAWER SUPPLIED PARTS COOLDRAWER™ INTEGRATED COOLDRAWER MULTI-TEMPERATURE DRAWER RB36S & RB90S models MULTI-TEMPERATURE DRAWER RB90S model SERVICE & WARRANTY SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU SERVICE OG GARANTI 保 修 和 维 修 服務和保修...
DRAWER PANELS HANDLE KIT The Stainless steel drawer panel is not supplied and must be purchased separately through an The handle kit is not supplied and must be purchased separately through an authorised authorised Fisher and Paykel dealer. Visit fisherpaykel.com for more information. Fisher &...
PRODUCT DIMENSIONS FRONT VIEW PROFILE VIEW PRODUCT DIMENSIONS A Overall height of product* B Overall width of product* C Depth of chassis** D Width of internal drawer front E Depth of internal drawer front F Depth of drawer (open) measured from front* * Does not include Stainless steel or custom door panel, false panel and handle.
STAINLESS STEEL PANEL DIMENSIONS CONTEMPORARY DRAWER PANEL DIMENSIONS A Height of custom drawer panel B Width of custom drawer panel C Depth of custom drawer panel Weight of drawer panel (including handle) FALSE PANEL DIMENSIONS D Height of custom false panel 150 - 180 E Width of custom false panel min 896...
CUSTOM PANEL DIMENSIONS — SINGLE PANEL DRAWER PANEL DIMENSIONS A Height of custom drawer panel min 630 B Width of custom drawer panel min 896 C Depth of custom drawer panel 16 - 20 Maximum weight of drawer (including handle) 7 kg Custom drawer panel to be manufactured and fitted by cabinetmaker.
CUSTOM PANEL DIMENSIONS — DUAL PANEL DRAWER PANEL DIMENSIONS A Height of custom drawer panel min 476 B Width of custom drawer panel min 896 C Depth of custom drawer panel 16 - 20 Weight of drawer panel (including handle) FALSE PANEL DIMENSIONS D Height of custom false panel 150 - 180...
CABINETRY DIMENSIONS — FRAMED DIMENSIONS A Overall width of cabinetry frame B Inside width of cabinetry frame min 864 C Inside height from top inner face of cabinetry frame spacer min 644 to top of spacer* D Inside height from top inner face to bottom inner face 665 - 764 of cabinetry frame E Inside depth from front to rear wall of cabinetry...
CABINETRY DIMENSIONS — FRAMELESS DIMENSIONS A Overall width of cabinetry frame B Inside width of cabinetry frame min 864 spacer C Inside height from top inner face of cabinetry frame min 644 to top of spacer* D Inside height from top inner face to bottom inner face 665 - 764 of cabinetry frame E Inside depth from front to rear wall of cabinetry...
ELECTRICAL CONNECTION Services can be located on either side of the CoolDrawer . Disconnect power to surrounding appliances before preparing the cavity. 1850mm 1250mm 2000mm 2000mm SUPPLY DIMENSIONS ELECTRICAL SPECIFICATIONS Supply 230 VAC, 50 Hz A Diameter of supply area cutout Ø...
CABINETRY PREPARATION INSTALL BRACKETS ATTACH VENT DUCTS Locate the vent ducts to the slots in the cabinetry frame. Locate the brackets to the top of each spacer. Ensure there is 25mm clearance between the front end of 25mm cabinetry frame and front of bracket.
PANEL PREPARATION STAINLESS STEEL PANEL CUSTOM PANEL Refer to the dimensions below for the preparation of the Custom door panel when attaching the attachment hooks. Drill the screw holes using a 6mm drill bit, and counterbore from the rear. top attachment hook min 896mm 18mm 18mm...
ATTACH POWER CORD & TRIM BRACKETS POSITION PRODUCT INTO CABINETRY Connect the power plug to the back Place the Cooldrawer in front of the Cooldrawer and clip the of the cabinetry and connect the cord in place. power plug to the power outlet. 46mm Secure the trim brackets with screws to the side of the Cooldrawer...
ATTACH DRAWER PANEL Slide the panel to achieve even Hook the drawer panel onto the horizontal clearances. drawer front channel. Close the drawer and check vertical clearances. Open the drawer and clamp the panel onto the drawer by tightening the bottom attachment hook. Close the drawer and ensure it is Remove the panel and adjust the flush with the adjacent cabinetry.
SECURE PRODUCT TO CABINETRY ATTACH FALSE PANEL Open the drawer and secure the Attach the false panel securely as product to the cabinetry by securing recommended by the cabinet maker. the four trim brackets with screws. The false panel needs to be removable for servicing.
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Has all packaging been removed from the appliance? Is the appliance securely fastened to the cabinetry? Does the drawer slide freely and close properly? Has the outlet duct been installed correctly? Is the appliance level? Are the panels securely attached? Have the panels been properly aligned for correct operation and appearance? Are all clearances even?