Advertisement
SERVICE
REPLACING THE CABLES AND HOSES
Ducts are made using guiding tunnels inside of the bicycle frame. The ducts allow easy and quick replacement of
cables and hoses within their full length without need to break them.
1 REPLACING THE REAR DERAILLEUR CABLE
1.1 Slide the old cable out from the guide in the frame.
1.2 Slide a new cable in the frame through the hole A1 and pull it out through the head tube upwards.
1.3 Slide the cable through the hole A2 in the right chain stay.
1.4 Fix the cable to the hitch A3 using a tying strip.
A2
A1
A3
2 REPLACING THE HYDRAULIC HOSE OF THE REAR BRAKE
2.1 Slide the old hose out from the guide in the frame.
2.2 Slide a new hose in the left chain stay through hole B1.
2.3 Put the hose from the inner side under the main pivot.
2.4 Insert the hose through the hole B2 in the frame and slide the head tube out upwards.
B2
B1
Advertisement
