Toro 74643 Operator's Manual page 8

Table of Contents

Advertisement

1. Warning—read the Operator's Manual.
2. Warning—read the instructions before servicing or performing
maintenance; move the motion control levers to the park
(brake) position, remove the ignition key and disconnect the
spark plug wire.
3. Cutting/dismemberment hazard, mower blade; entanglement
hazard, belt—stay away from moving parts, keep all guards
and shields in place.
4. Thrown object hazard—keep bystanders a safe distance from
the machine, pick up debris before operating, keep deflector
in place.
112-9840
1. Read the Operator's
Manual.
2. Height of cut
3. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
120-2239
5. Warning—do not use split ramps, use a full ramps when
transporting machine.
6. Loss of traction/control hazard, slopes—loss of traction/control
on a slope, disengage the blade control switch (PTO),
proceed off the slope slowly.
7. Crushing/dismemberment hazard of bystanders, reversing;
crushing/dismemberment hazard of bystanders—do not carry
passengers, look behind and down when reversing.
8. Tipping hazard—do not mow slopes greater than 15 degrees,
avoid sudden and sharp turns while on slopes.
1. Slow (trim and tow)
8
130-0780
2. Fast (mow and go)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter mx 5060

Table of Contents