To Operate The System (With Cool/Heat Changeover Remote Control Switch); Using The Dry Program; About The Dry Program - Daikin VRV IV+ RXYTQ8U5YF Installer And User Manual

7.3.5 To operate the system (WITH cool/heat changeover remote control switch)

7.4 Using the dry program

7.4.1 About the dry program

RXYTQ
VRV IV+ heat pump for high ambient temperatures
4P561157-1B – 2021.11
Overview of the changeover remote control switch
a
b
Note: In case a cool/heat changeover remote control switch is used, the position of
DIP switch 1 (DS1-1) on the main PCB needs to be switched to the ON position.
To start
1 Select operation mode with the cool/heat changeover switch as follows:
Cooling operation
1 1
1
2 Press the ON/OFF button on the user interface.
Result: The operation lamp lights up and the system starts operating.
To stop
3 Press the ON/OFF button on the user interface once again.
Result: The operation lamp goes out and the system stops operating.
NOTICE
Do not turn off power immediately after the unit stops, but wait for at least 5
minutes.
To adjust
For programming temperature, fan speed and air flow direction refer to the
operation manual of the user interface.
▪ The function of this program is to decrease the humidity in your room with
minimal temperature decrease (minimal room cooling).
a FAN ONLY/AIR CONDITIONING SELECTOR
SWITCH
Set the switch to
for heating or cooling operation.
b COOL/HEAT CHANGEOVER SWITCH
Set the switch to
heating
Heating operation
1
1 1
7 Operation
|
for fan only operation or to
for cooling or to for
Fan only operation
1 1
Installer and user reference guide
27