Energy Saving And Optimum Operation; Available Main Operation Methods - Daikin VRV IV+ RXYTQ8U5YF Installer And User Manual

8 Energy saving and optimum operation

In this chapter

8.1 Available main operation methods

RXYTQ
VRV IV+ heat pump for high ambient temperatures
4P561157-1B – 2021.11
Observe the following precautions to ensure the system operates properly.
▪ Adjust the air outlet properly and avoid direct air flow to room inhabitants.
▪ Adjust the room temperature properly for a comfortable environment. Avoid
excessive heating or cooling.
▪ Prevent direct sunlight from entering a room during cooling operation by using
curtains or blinds.
▪ Ventilate often. Extended use requires special attention to ventilation.
▪ Keep doors and windows closed. If the doors and windows remain open, air will
flow out of your room causing a decrease in the cooling or heating effect.
▪ Be careful NOT to cool or heat too much. To save energy, keep the temperature
setting at a moderate level.
▪ NEVER place objects near the air inlet or the air outlet of the unit. Doing so may
cause a reduced heating/cooling effect or stop operation.
▪ Turn off the main power supply switch to the unit when the unit is not used for
longer periods of time. If the switch is on, it consumes electricity. Before
restarting the unit, turn on the main power supply switch 6 hours before
operation to ensure smooth running. (Refer to "Maintenance" in the indoor unit
manual.)
▪ When the display shows
person to clean the filters. (Refer to "Maintenance" in the indoor unit manual.)
▪ Keep the indoor unit and user interface at least 1 m away from televisions,
radios, stereos, and other similar equipment. Failing to do so may cause static or
distorted pictures.
▪ Do NOT place items under the indoor unit, as they may be damaged by water.
▪ Condensation may form if the humidity is above 80% or if the drain outlet gets
blocked.
Several patterns are available and roughly explained below. Contact your installer
or dealer for advice or to modify the parameters to the needs of your building.
Detailed information is given for the installer in the installation manual. He can
help you to realize the best balance between energy consumption and comfort.
8.1 Available main operation methods ........................................................................................................................................
8.2 Available comfort settings......................................................................................................................................................
Basic
The refrigerant temperature is fixed independent from the situation. It
corresponds to the standard operation which is known and can be expected from/
under previous VRV systems.
Automatic
The refrigerant temperature is set depending on the outdoor ambient conditions.
As such adjusting the refrigerant temperature to match the required load (which is
also related to the outdoor ambient conditions).
8 Energy saving and optimum operation
|
(time to clean the air filter), ask a qualified service
31
32
Installer and user reference guide
31