Safety Instructions - Stanley DUBUIS KW Hydraulik BPE130 Instruction Manual

SAFETY INSTRUCTIONS

HYDRAULIC CRIMPING TOOL:
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO READ CAREFULLY THE
DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTIONS IT CONTAINS.
IF YOU DO NOT RESPECT THE INFORMATION WRITTEN IN THAT INSTRUCTION MANUAL THE
WARRANTY WILL BE CANCELLED.
This tool satisfies with European safety standards.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection
system for used electronic products in accordance with legislation that requires proper treatment, recover and
recycling.
Do not slide your fingers in the dies profile.
Do not put your fingers in the head of the hydraulic crimping tool when you slide the dies inside it. Your fingers
could be pinched very severely.
Handle the locking spindle with precaution to avoid being pinched.
ADVICE:
It is recommended to keep the tool away from dusty or rough places, in order to avoid wrong working.
Although this tool is robust, it must be handled with care.
After use, wipe the tool carefully and replace it in its case.
Keep the tool inside, in a ventilated warehouse. Avoid fast temperature changes, this can produce condensation.
CHARGER:
See battery charger instruction manual.
BATTERY:
See battery charger instruction manual.
English