Network Stack - Asus M5A99FX PRO R2.0 Manual

ErP Ready [Disabled]
[Disabled]
[Enabled]
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Device [Enabled]
[Disabled]
[Enabled]
Power On By PME Device [Enabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3.5.9

Network Stack

Network stack [Disabled]
This item allows user to enable/disable UEFI network stack function.
Configuration options: [Disabled] [Enabled]
3-26
Disables the Energy Related Products (ErP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Disables the PS/2 devices from generating a wake event.
Enables the PS/2 devices to generate a wake event.
Disables the PME devices from generating a wake event.
Enables the PME devices to generate a wake event.
Disables the Ring devices from generating a wake event.
Enables the Ring devices to generate a wake event.
Disables RTC from generating a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Chapter 3: BIOS setup