Preparing To Scan - Epson ET-L6550 Series User Manual

Administrator Information
Messages
Connection test failed.
Check the settings.
Connection test failed.
Check the date and time on your
product or server.
Authentication failed.
Check the settings.
Cannot access the printer until
processing is complete.

Preparing to Scan

Scanning using the control panel
The scan to network folder function and the scan to mail function using the printer's control panel, as well as the
transfer of scan results to mail, folders, etc. are performed by executing a job from the computer.
Settings of Servers and Folders
Name
Scan to Network Folder
(SMB)
Scan to Network Folder
(FTP)
Scan to Email
>
Settings to Use the Printer
This message appears for the following reasons:
❏ The LDAP server address or the port number is incorrect.
❏ A timeout has occurred.
❏ Do Not Use is selected as the Use LDAP Server.
❏ If Kerberos Authentication is selected as the Authentication Method,
settings such as Realm (Domain), KDC Address and Port Number (Kerberos)
are incorrect.
This message appears when the connection fails because the time settings for the
printer and the LDAP server are mismatched.
This message appears for the following reasons:
❏ User Name and/or Password is incorrect.
❏ If Kerberos Authentication is selected as the Authentication Method, the
time/date may not be configured.
This message appears when the printer is busy.
Settings
Create and set up sharing of
the save folder
Destination for Scan to
Network Folder (SMB)
Setup for FTP server log on
Setup for email server
>
Preparing to Scan
Explanation
Location
A computer that has a save
folder location
Contacts of the device
Contacts of the device
Device
385
Requirement
The administrative user
account to the computer
that creates save folders.
User name and password
to log on to the
computer that has the
save folder, and the
privilege to update the
save folder.
Logon information for
the FTP server and the
privilege to update the
save folder.
Setup information for
email server