Troubleshooting /11 - Beko RCNA305K30SN Instructions For Use Manual

EN
The noise produced by the compressor becomes
stronger when it starts and a click can be heard when
it stops.
- The performance and operation features of the
appliance can change according to the modifications
of the temperature of the ambient environment. They
must be considered as normal.
2. Noises like liquids flowing or as being sprayed
- These noises are caused by the flow of the
refrigerant in the circuit of the appliance and comply
with the operation principle of the appliance.
3. Noise similar to wind blowing.
- It is generated by the fan (fans) with which your
appliance is endowed. These fans help to the efficient
cooling of the appliance. This noise is normal, not a
defect.
4. Other vibrations and noises.
- The level of noise and vibrations can be caused by
the type and the aspect of the floor on which the
appliance is placed. Make sure that the floor does not
have significant level distortions or if it can yield to the
weight of the appliance (it is flexible).
The symbol
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which could
otherwise be otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office, you
household waste disposal service or the shop where you purchased the product.
on the product or on packaging indicates that this product may not be treated as
- Another source of noise and vibrations is
represented by the objects placed on the appliance.
These objects must be removed from the appliance
- The bottles and the vessels placed in the refrigerator
touching each other. In such cases move the bottles
and the vessels so that there is a small distance
between them.
Troubleshooting
If the appliance does not operate when switched on,
check;
• That the plug is inserted properly in the socket and
that the power supply is on. (To check the power
supply to the socket, plug in another appliance)
• Whether the fuse has blown/circuit breaker has
tripped/main distribution switch has been turned off.
• That the temperature control has been set correctly.
• That the new plug is wired correctly, if you have
changed the fitted, moulded plug.
If the appliance is still not operating at all after above
checks, contact the dealer from whom you purchased
the unit.
Please ensure that above checks have been done,
as a charge will be made if no fault is found.
11
Instruction for use