Maintenance; Symbols On The Product; Symbols In This Manual - Ryobi RPLS18X Manual

16. Dust port
17. Blade screw
18. Outer flange
19. Saw blade
20. Riving knife
21. Bevel angle bypass lever
22. Track adjustment lock knob
23. Track adjustment tab
24. Track wrench
25. Blade wrench
26. 45º bevel setting screw
27. Operator's manual
28. Wrench
29. Hex key
30. Screwdriver
31. Battery pack
32. Charger

MAINTENANCE

■
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■
When servicing, use only original manufacturer's
replacement parts, accessories and attachments. Use
of any other parts may create a hazard or cause product
damage.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
■
For greater safety and reliability, all repairs should be
performed by an authorised service centre.

SYMBOLS ON THE PRODUCT

Safety alert
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Please read the instructions carefully before
starting the product.
Wear ear protection.
6
Original Instructions
Wear eye protection.
Wear a dust mask.
Blade width of cut (kerf)
Number of teeth on this saw blade
For cutting wood and analogous material
Not for cutting metals
Blade rotation direction (shown on blade
guard)
Do not dispose of waste batteries, waste
electrical and electronic equipment as
unsorted municipal waste. Waste batteries
and waste electrical and electronic
equipment must be collected separately.
Waste batteries, waste accumulators, and
light sources have to be removed from the
equipment. Check with your local authority
or retailer for recycling advice and collection
point. According to local regulations,
retailers may have an obligation to take
back waste batteries and waste electrical
and electronic equipment free of charge.
Your contribution to the reuse and recycling
of waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials. Waste batteries,
in particular containing lithium, and waste
electrical and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment and
the human health if not disposed of in an
environmentally compatible manner. Delete
personal data from waste equipment, if any.

SYMBOLS IN THIS MANUAL

Lock
Unlock
Parts or accessories sold separately
Note
Warning