e) Do not overreach. Keep proper footing and balance at all GENERAL POWER TOOL SAFETY WARNINGS times. This enables better control of the power tool in unexpected situations. WARNING! f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving Read all safety warnings and all instructions.
on both sides, near the line of cut and near the edge of the INSTALLING OR CHANGING SAW BLADE SPECIFIC SAFETY RULES SYMBOLS panel. To install the saw blade (Fig. 2) e) Do not use dull or damaged blades. Unsharpened or Cutting procedures improperly set blades produce narrow kerf causing Safety alert...
NOTE DEPTH ADJUSTMENT (Fig. 6) The rotating parts get stuck or speed drops abnormally low. The tool shakes abnormally accompanied by some unusual 1. Loosen the depth adjustment screw using the depth locking noise. lever. The motor housing gets abnormal hot. 2.