Hotpoint OSHS89EDC 0 Operating Instructions Manual page 6

power cable supply connection to the electrical mains:
GB
We recommend you use a power supply cable which is long enough to allow
you to take the oven out of its recess in the event of maintenance operations
(only use HAR - H 05 - RRF quality cables fitted with a plug conforming to
the regulations in force.
The plug must be accessible at all times.
Unplug the appliance before all operations, even when replacing the
oven lamp.
Using the appliance without correct earthing is highly dangerous.
! After connecting the appliance to the flexible cable, tighten all the screws
on the terminal board.
APPLIANCE SPECIFICATIONS
Dimensions*
Volume*
width
Dimensions** height
depth
Volume**
voltage: 230-240V~ 50Hz
Electrical
(see data plate) maximum power
connections
absorbed 2600-2800 W
Regulation (EU) No 65/2014
to supplement Directive 2010/30/EU
Regulation (EU) No 66/2014
Energy
to supplement Directive 2009/125/EC
Label e
Standard EN 60350-1
Ecodesign
Standard EN 50564
Declared energy consumption
for Forced convection
Class - heating mode:
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EC dated 12/12/06 (Low
Voltage) and subsequent amendments.
- 2004/108/EC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments.
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2012/19/EU and subsequent
amendments.
1275/2008 Stand-by/off mode
* Only for models with drawn rails.
** Only for models with wire rails.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
width 43.5 cm
height 41 cm
depth 41 cm
74 l
45.6 cm
41 cm
41 cm
77 l
ECO