Samsung NZ64H5747DK User Manual page 83

What should I do if, after the cooking zones have been
switched off, residual warmth is not indicated in the display?
Check for the following possibility:
• The cooking zone was only briefly used and therefore
did not become hot enough. If the cooking zone is hot,
please call the customer service centre.
What should I do if the cooking zone will not switch on or off?
This could be due to one of the following possibilities:
• The control panel is partially covered by a damp cloth or liquid.
• The child safety lock is on.
What should I do if the
Check for the following:
• The control panel is partially covered by a damp cloth
or liquid. To reset, press the "On/Off" control sensor.
What should I do if the
Check for the following:
• The hob is overheated because of abnormal operation.
• After hob is cooled down, press the "On/Off" control
sensor for resetting.
What should I do if the
Check for the following:
• Cookware is unsuitable or too small or no cookware has
been placed on the cooking zone.
• If you use suitable cookware, displayed message will
automatically disappear.
What should I do if the cooling fan runs after the hob
is turned off?
Check for the following:
• When you have finished using the hob, the cooling fan
runs by itself for cooling down.
• After the hob's electronics has cooled down, the cooling
fan will be turned off.
If you request a service call because of an error made in
operating the appliance, the visit from the customer service
technician may incur a charge even during the warranty period.
NZ64H5747DK_ET_DG68-00660B-02_EN.indd 39
display is illuminated?
display is illuminated?
display is illuminated?
English - 39
2017-05-25 12:20:46