Samsung NZ64H5747DK User Manual page 73

2. Press Timer Control
The number 10 will be displayed
above the timer display.
3. Use the Timer setting selectors (
or ) to set the desired amount
of time, for example, 15 minutes,
after which the cooking zone will
automatically switch itself off. The
safety shutoff is now activated.
4. To cancel the timer settings, select
the target burner and hold down
the Timer Control
3 seconds. This will cancel the
burner's timer settings with a beep.
If holding down the Timer Control
sensor for 3 seconds without selecting a burner,
this will cancel the timer settings of the last changed
burner.
To display the time remaining for any of the cooking
zones, use the Timer Control
The corresponding control indicator will begin to blink
slowly.
The settings are reset using the Timer setting selectors (
). After the set period of time has elapsed, the cooking
zone automatically switches itself off, an acoustic signal
sounds as confirmation and the timer display indicates.
If you tap the Timer Control
selecting a cooking zone, the display turns on but no
timer settings is applied.
To change the settings quicker, touch and hold any of
the or
reached.
NZ64H5747DK_ET_DG68-00660B-02_EN.indd 29
sensor.
sensor for
control sensors until the desired value is
English - 29
sensor.
sensor without
or
2017-05-25 12:20:44