Bosch HBJ538E 0M Series User Manual And Installation Instructions page 13

Use the ⁠ button to switch to the next basic setting.
3.
To save the changes, press and hold
4.
four seconds.
Note: Following a power failure, the factory basic set-
tings are restored.
Cleaning and servicing
11 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
11.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use aggressive or abrasive cleaning agents.
▶
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance
Surface Suitable cleaning agents Information
Stainless steel ¡ Hot soapy water
¡ Special stainless steel
Enamel, plastic, ¡ Hot soapy water
painted, and
screen-printed
surfaces
E.g. control panel
Knobs ¡ Hot soapy water
Appliance cover
Area Suitable cleaning agents Information
Door panels ¡ Hot soapy water
Door cover ¡ Made of stainless
¡ Made of plastic:
Door handle ¡ Hot soapy water
Door seal ¡ Hot soapy water
for approx.
cleaning products
suitable for hot sur-
faces
steel:
Stainless steel
cleaner:
Hot soapy water
10.3 Discarding changes to the basic
settings
Turn the function selector.
▶
a All changes are discarded and not saved.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners if the appliance is
▶
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
Do not use oven cleaner in the cooking compart-
▶
ment when it is still warm.
Remove all food remnants from the cooking com-
▶
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
Wash new sponge cloths thoroughly before use.
▶
Follow the instructions on cleaning the appliance.
→ "Cleaning the appliance", Page 14
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel surfaces immediately.
Apply a thin layer of the stainless steel cleaning product.
Do not use a glass cleaning product or a glass scraper.
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Do not use a glass scraper or steel wool.
Tip: Remove the door panels in order to clean them thoroughly.
→ "Appliance door", Page 16
Do not use a glass cleaning product or a glass scraper.
Tip: To thoroughly clean the cover plate, remove the cover.
→ "Appliance door", Page 16
In order to avoid stubborn dirt, remove descaling agents from the
door handle immediately.
Do not remove or scrub.
Cleaning and servicing en
13